Measure the clear opening at the wall
Measure vertically from the top of the lower shelf to the underside of the upper shelf. Take that measurement at the left, centre and right of the area you want to use. If the shelves slope or the gap varies, use the smallest height across the proposed sign position.
Next, measure the width you can use at that height. If the upper shelf has brackets that extend into the gap, measure between their inner edges where they overlap the sign position. If the space is open at the sides, mark where you want the sign to end and measure between those marks. Record the clear width and height together for the same spot on the wall.
Check what projects in front of the sign
Measure each shelf from the wall to its front edge. Note any bracket, lip or trim that sticks out or down. Take one photo straight on and another from the side, then label them with the clear width, the smallest height and the shelf depths. The featured illustration shows where to mark the proposed sign outline. Add your own measurements to a photo of your shelves.
Use low-tack tape or a paper cut-out to mark the finished sign size, including the backboard. Look at it from your usual seat and from the doorway. A deep upper shelf can hide the top edge when you’re seated and looking up. A lower shelf can hide the bottom edge when you’re standing close and looking down. If an edge disappears, try a smaller outline or move it within the opening, then check both views again.
Check the fitting space before you order
Compare the exact outside dimensions on your proof with the opening you measured. Allow room to bring the sign into position, reach the fixings and route the cable past the shelf edge or brackets. If the gap is tight, ask for the mounting hole positions, cable exit and fitted depth. Use those details to check access with the shelves in place.
Keep your annotated photos with the measurements when you ask for a proof. If the size, wording or backboard shape changes, update the outline and repeat the fit check. For help comparing sign shapes and proportions, see our neon sign size guide.