Measure the wall space above the counter
Measure the counter from end to end, then measure the clear patch of wall where the sign could sit. Write down both numbers. The counter width gives you a visual reference, while the clear wall width tells you what can physically fit. A cupboard, a mirror or the end of a shelf can make that usable space much narrower than the counter below it.
Measure the clear height as well. Start with the bottles, glassware and other things you normally leave out. If the sign will sit above a shelf, measure from above the tallest item that usually goes there to the next obstruction. Mark the midpoint of the clear wall space with a small piece of low-tack tape. It may sit off-centre relative to the counter, and that’s a useful position to try first.
Use the finished outside width and height of the sign for this check, including the backboard. If you only have the dimensions of the lettering, ask for the overall dimensions before ordering. Our neon sign size guide covers how to measure for other shapes and layouts.
Make two full-size paper mock-ups
Choose two candidate widths and cut a sheet of paper for each one. Use the proportions of the design you’re considering to work out the corresponding heights. If you have a design preview, print it across several sheets at actual size and check the width with a tape measure. You can also draw the same words on both sheets, scaling the letters and spacing together. A blank rectangle helps you check the fit, but lettering gives you something to judge from across the room.
Keep the wording, style and wall position the same for the first comparison. Put up one sheet at a time with its centre on the tape mark. Once you have a preferred size, move it up or sideways and see whether the new position improves the view. The illustration above shows the paper mock-up method on two example bars. Use the dimensions below to follow the worked comparisons.
Two worked examples for different counter widths
These are illustrative layouts. The dimensions are for paper templates, and the checks show how you could make a decision in each space.
A 120 cm drinks counter with shelving
Say the counter is 120 cm wide, but a cabinet and shelf leave a clear wall area 96 cm wide and 34 cm high. Try a 65 × 23 cm paper outline and an 85 × 30 cm outline. Centred in that opening, the smaller outline leaves 15.5 cm on each side. The larger outline leaves 5.5 cm on each side and only 4 cm of spare height in total.
Start with the 65 cm outline. From the nearest stool, check whether the lettering sits comfortably between the shelves and stays above the bottles in your line of sight. Then look from the doorway. If the phrase is easy to read from there, the smaller size gives you more room to adjust the position. If the doorway view calls for larger lettering, try the 85 cm outline and check whether you still have enough room to lift it above the bottles.
A 180 cm bar with a clear wall behind it
Say the counter is 180 cm wide and the part of the wall you want to use is 140 cm wide and 46 cm high. Compare an 85 × 30 cm outline with a 105 × 37 cm outline. The larger template leaves 17.5 cm on each side when centred, so you have room to try a slight shift if the doorway is off to one side. Moving it 10 cm towards one edge would leave 7.5 cm on that side and 27.5 cm on the other.
Try the wider template from the doorway first if you want the sign to catch your eye as you walk in. Then sit at the end stool and check whether the whole phrase is visible around anything that projects from the wall or sits on the counter. If shifting the wider template helps from the doorway but makes it feel crowded from the stool, try the 85 cm template in that same spot. The better choice depends on which view matters most to you.
Check from the doorway and the seats
Stand where you first see the bar as you enter and check whether you can see both ends of the wording in one glance. Then sit at the nearest stool and the end stool at your usual eye level. Look for a bottle, shelf edge or pendant shade that crosses the lettering from one of those positions. Leave the bar set up as you normally use it so you can spot anything that would be missed on an empty counter.
Take a photo of each size from the same spots using the same camera setting. Comparing the photos can make it easier to see whether one size feels squeezed beside a cupboard or whether the sign looks better centred over the drinks area. Paper helps you judge position, scale and sightlines. The finished sign’s glow will also depend on the lighting and surfaces around it.
Confirm the finished dimensions before ordering
Keep a note of your preferred width and the maximum height you can accommodate. If you change the font or stack the words, check the height again and make a new outline if needed. For a tight opening, confirm the widest and tallest points of the finished sign, including the backboard, against the space you measured.
If you’re still deciding on a phrase or style, explore our home bar neon sign ideas. Once you’ve picked a design, use your preferred paper outline to check its size on the wall.