Compare one line with two at the same width
Measure the space where the sign will go. Leave room around it for the backboard and nearby features such as shelves or picture frames. Use the remaining width as a starting point for your lettering mock-up. If you have 80 cm available for the lettering, make the single line 80 cm wide and the widest line of the stacked version 80 cm wide too.
Keep the words, font and capital letters the same. In the mock-up above, “Come on in, stay a while” is split after the comma. The shorter lines leave room for taller letters at the same overall lettering width. The trade-off is height, so check that both lines fit in the space you’ve measured.
Check the smallest word from your usual viewing spot
Print each layout at the intended size, using several sheets taped together if needed. Check the printed width with a tape measure, then put each version where the sign would sit. Stand where you’ll usually see it, whether that’s by the door, across the room or from a seat.
Look away, then glance back and see if you can pick out the shortest word straight away. In this example, it’s the “A” in “stay a while”. If you already know the phrase, ask someone who hasn’t seen it to read it aloud from the same spot. Listen for skipped words or hesitation. A paper mock-up helps you judge letter size and spacing. The finished sign’s glow and the room lighting can also affect readability.
Choose the layout that fits and reads clearly
If the single line reads easily, keep it. If the stacked version is easier to read and you have the height, break the phrase where you’d naturally pause. If both versions are hard to read, try a simpler font or cut a word or two, then repeat the test. Our custom neon sign wording ideas can help you find a shorter way to say it.
Once you’ve settled on a layout, use the neon sign size guide to check the overall dimensions against your space, including the height if you’ve chosen two lines.