Set up the sign where it will actually sit
Start by deciding what someone passing the shop needs to read. For an OPEN sign, that’s one word. For a shop name with a tagline, decide whether the tagline needs to be readable from the pavement or can wait until someone reaches the door. Write down the essential wording before you test. It gives you a clear way to judge each position.
If you already have the sign, test it lit in its proposed position with the shop lights set as they normally are. If you’re still ordering, print or draw the design at the proposed finished size and place it behind the glass at the intended height and distance from the pane. Mark the whole design, including the smallest words, so you can see whether anything falls behind a frame or display.
A paper mock-up can reveal cramped lettering, awkward placement and blocked sightlines. Use the finished, illuminated sign to check how the glow looks through your glass. For more help with the scale of the artwork, see our neon sign size guide.
Choose three places on the pavement
Pick one spot directly in front of the window and one on each approach along the pavement. Use places where people naturally get their first view of the shop, such as where they pass the neighbouring frontage or come round a corner. If most customers arrive from one direction, give that approach priority.
Ask someone who hasn’t seen the design to walk past at their usual pace and tell you what they read, without giving them the wording first. If they can see that something is lit but can only read the message once they stop in front of the glass, record where it first became clear. That distinction matters when the sign is meant to catch people before they reach the door.
Take a photo from each spot at roughly eye level, using the same lens and no zoom. Use the photos to remember where a reflection crossed the sign or a frame covered a letter. Use what your reader saw to judge readability, since a phone’s exposure can change how bright the lettering and reflections appear.
Repeat the check at three times of day
The featured illustration shows the same window in morning light, brighter daylight and at dusk. Use those three conditions as a starting point, then choose times that fit your opening hours and the way light falls on your shopfront.
- Morning or opening time. Look for reflected sky, pale buildings opposite or low sun. Check whether a reflection sits directly over the essential wording from either approach.
- Brightest trading period. Check again around midday or during the afternoon, depending on when your window gets the strongest light. Leave the display as customers normally see it, including posters, shelving and products that might cover part of the sign.
- Dusk or evening. Leave the interior lights on as they normally are. Check whether a pendant light, a bright display behind the sign or the glow around close-set letters makes the wording harder to read.
For each check, note the time, the weather and the viewing spot. Record clear at a glance, readable after stopping or unreadable, then add what got in the way. Keep the sign in the same position for the first round so you can compare the effect of time and viewing angle. If all three checks happen under cloud, repeat the brightest-period check on a sunny day if direct sun reaches the window during trading hours.
Change one thing and repeat the hardest view
If a reflection crosses the letters, try another part of the pane or a different sign height. Repeat the check from the same pavement spot. Moving the sign may clear one reflection and put it in the path of another, so check both approaches again before settling on a position.
If a frame or display hides a letter, move the sign or the object that blocks it, then walk the same route. For example, if the upright between two panes covers the first letter when you approach from the left, try placing the full word within one pane. Check the other approach before choosing which pane to use.
If the sign is fully visible but the words are hard to make out, compare simpler lettering, more space between letters or a layout that makes the main word bigger. Try one change at a time at the intended size. If a lit sign reads well by day but the letters seem to merge after dusk, try a lower evening setting if the sign has a dimmer, then repeat the walking check.
Turn your notes into a sign brief
Keep the photo from the hardest approach and one taken straight on. Mark the preferred pane and approximate sign position on the straight-on photo. Add the usable width and height, the wording that needs to read first and a note about any reflection or obstruction you found. If there’s a secondary line, say where you expect people to be able to read it.
For a daytime OPEN sign, prioritise the view during trading hours. For a shop name intended to catch evening footfall, give the dusk check more weight. If the proposed position still struggles at the time that matters most, revise the placement or lettering and repeat that check before approving the design. If you’re still choosing what the sign should say or where it should go, browse our retail shop neon sign ideas for storefront and interior examples.