Five things to check on a custom neon sign proof before approving it

Before you approve a custom neon sign proof, check the wording, LED colours, finished dimensions, cable exit and mounting view. Open the latest proof alongside your original brief and a photo of where the sign will sit. If a detail is missing, ask for it to be marked on the drawing or confirmed in writing so you can approve one clearly identified version.

Illustrative GLOW neon sign proof with aqua lettering, a clear backboard, mounting holes, dimension arrows and a lower-right cable exit.

1. Read every character against your original brief

Open the latest proof next to the wording you sent. Read the sign one line at a time, including the small text. Check names, dates, capital letters, apostrophes, accents and punctuation. Then check where each line breaks. A phrase can be spelt correctly and still read differently if a name or a pair of words is split across two lines.

For names and dates, ask someone else to read the proof aloud while you follow the original wording. If the lettering is script, zoom in on places where letters join or a decorative stroke could look like an extra character. Mark the exact spot that needs changing and type out the correct line in your reply. For a logo that still needs adapting, see how to check whether your logo works in LED neon. Come back to this checklist once the layout is settled.

2. Confirm the LED colour for each part of the design

Read the colour names on the proof or in the written specification. If your design uses more than one colour, check where each one goes. For example, you might have chosen warm white for the lettering and aqua for a symbol. Ask for those choices to be listed against the relevant parts so both you and the designer are looking at the same specification.

Use the render to judge where the colours sit together. Screen settings and simulated glow can change how a shade looks, so use the agreed tubing colour name when you give feedback. If a particular brand shade matters, send the colour reference and ask which available tubing colour is closest. If the proof shows colour on the backboard or inside an outline, confirm which elements are illuminated and which are decorative. You can review the Neon Now LED neon colour options before settling on the final specification.

3. Check the finished width and height where the sign will go

Look for the overall finished width and height, including the backboard. If the numbers only describe the illuminated artwork, ask for the overall dimensions as well. Check the units and confirm which number is the width. For a design supplied in sections, check the overall dimensions as the sections will sit together and ask where any joins will fall.

Measure the usable space at the intended position. Include anything that intrudes into it, such as a shelf lip, picture rail or cabinet door when it opens. Mark the outside dimensions with low-tack tape where suitable, or hold up a paper template. If the size is tight, also mark the distance to the nearest obstruction. Then check that the sign sits where you want it in relation to the furniture or architectural feature below. Our neon sign size guide can help you work through the available space.

4. Match the cable exit to the route you’ve planned

Find the exact point where the power cable leaves the sign. A room mock-up may leave the lead out for clarity. If the exit is missing or ambiguous, ask for it to be marked on the front view. Describe left and right as you see them while facing the sign. If you’re reviewing a rear drawing, ask the designer to label the corresponding side on the front view too.

Compare the exit on the proof with your wall photo. If you plan to run the lead down the right of a cabinet, check whether it actually exits on that side and whether it will clear the cabinet edge. If the exit has moved since an earlier proof, recheck the route from the new starting point. For help checking the lead length and adaptor position, follow our guide to planning a wall neon sign cable route.

5. Ask for a mounting view that shows where the sign attaches

Look for a straight-on view showing the backboard outline and the proposed fixing or hanging points. If you’re using an existing bracket, a display panel or a narrow fixing area, send a photo or drawing of that surface and ask the designer to show where the attachment points will land. If you need exact hole positions, ask for a dimensioned mounting drawing before preparing the surface.

Ask for a side view if clearance matters. For instance, a sign in a recess may fit across the opening but still project further than you expected once the mounting hardware is included. Ask for the projection from the mounting surface to the front of the sign if you need to check it against a nearby door or panel. Once the mounting arrangement is agreed, use the neon sign installation guide to plan the fitting.

Approve one clearly identified version

If anything needs changing, put all your comments in one reply and ask for a revised proof. For example: “Please keep the wording as shown, label the LED colour for the symbol, and mark the cable exit on the lower right as viewed from the front. Please also show the overall backboard dimensions and fixing points on the revised drawing.”

When the revision comes back, run through all five checks again. A resize can change the backboard outline or the relationship between an edge and a fixing point. Make sure the proof and written order details agree, then identify the approved file by its revision number, date or filename in your reply. Starting a new project? Use the Neon Now logo and artwork upload form to share your artwork and any limits the proof needs to show.

GET A DESIGN PROOF FOR YOUR SIGN

Send us your logo or artwork, the space you have available and any cable or mounting requirements. We’ll review your brief and send you a design proof and quote.

Upload your logo or artwork